In: Categories » » PC components » Hard Drive BIOS Settings
As long as it has such a setting, it is best to set the BIOS to Auto, so that it detects the hard drive settings itself. Manually entering these settings might slightly reduce the time it takes for a computer to boot, but it won't be significant enough to make it worthwhile. Some motherboards auto-detect the drive the first time and set the parameters so that they don't have to detect the drives each time. The other option is often called User, meaning that the user sets the parameters. If you feel you need to set the information manually, the information is usually printed on the drive label, or is available from the drive manufacturer's Web site and includes such items as cylinders, heads, write precomp, landing zone, sectors, and size mode.
Also, look in the BIOS setup program for a S.M.A.R.T. drive setting. This feature reports potential problems with the hard drive. Sometimes it will report that a hard drive is ready to fail. This will hopefully give you time to back up the data to another drive before you lose it all. Certainly, no harm can come from enabling S.M.A.R.T., so as long as the setting is available, it should always be enabled.
Disk Partitioning and Formatting
The next step is to partition and format the drive as described earlier in this tutorial. In addition to FDISK, there are other setup programs you can use. In fact, just about all hard drive manufacturers offer installation, diagnostic, and other utilities free for download from their Web sites. Ontrack Data Recovery Services (ontrack.com) has enhanced versions of some of these utilities for sale. These utilities have many advantages over FDISK and FORMAT, including the capability of formatting partitions as NTFS.
On the CD The Industry Contacts document on the CD-ROM lists hard drive manufacturers. Visit their Web sites and look for downloads for installation, diagnostic, BIOS size limitation, and other utilities.
Tip Early in the Windows 2000/XP installation process, you are prompted to press the F6 key in case you want to install drivers for a special drive controller. You must do this if you want to install the OS on a SCSI or SATA hard drive. This option is available for only a few seconds.
When you set up Windows 2000 or XP from scratch or perform a clean install (installing an OS on a formatted drive, as opposed to running an upgrade), you can boot from an installation floppy or CD and follow the prompts. At a certain point you'll be shown a graph of available partitions and you'll be asked how you want to proceed. You might be able to use existing partitions or delete them and let Setup create new ones for you. You simply answer the prompts concerning the installation partition and file system you want. Then, Setup formats the partition as set. There is no need to pre-format a drive before installing 2000 or XP.
Note You might come across a function in a BIOS setup program or elsewhere called "low-level formatting." Never do this; it would likely ruin the drive and invalidate the warranty. The point of low-level formatting is to do a complete format and erase everything to eliminate a virus or prepare the drive for a new user. This includes data that the manufacturer wrote onto an otherwise inaccessible portion of the drive. If you need to perform this operation, use the drive manufacturer's utility. In Seagate's case, for example, the procedure is called "Zero Fill" because it replaces all data with zeroes, and is done with Seagate's Disk Wizard software.
Third-party disk management programs such as Power Quest's PartitionMagic (powerquest.com) have many features that aren't available in Windows or from any of the utilities that come with new hard drives. You can use PartitionMagic to create, delete, undelete, re-size, hide, merge, or move partitions, as well as change the file system or drive letters, all without losing data. These and many other features make it an especially useful tool for a technician to have, especially if you discover that you have finished installing an OS only to discover that you made an error in partitioning or formatting. You can use Partition Magic to correct the error without having to start all over.
Once you have installed, formatted, and partitioned the drive, you should be ready to install the OS.
legal notice
Our website is not responsible for the information contained by this article. Web-articles is a free articles resource.
Suggestion: If you need fresh, daily updated content for your website, feel free to use our service. Click here for more information.
Useful tools and features
If you like this article (tutorial), please link to it from your web page using the information above.
related articles
Troubleshooting Hard Drives Hard drives are a common culprit in PC problems. These problems can range from easily correctable to disastrous. As mentioned earlier in this tutorial, making sure S.M.A.R.T. drives are enabled in the BIOS will be helpful to catch some of these problems sooner than they otherwise would be caught. This section covers some common hard drive problems and solutions. Operating System Is Missing One of the most obvious signs of a hard drive problem is an error message early in the boot process s...
2. There are several different types of removable storage devices
Removable Storage Devices There are several different types of removable storage devices. We discussed removable full-sized hard drives in the section on RAID. There are additional uses for these. One is for drives containing data only (no OS or programs) that can be easily switched from machine to machine, although networks usually do that job. Another use is as an easy way to switch OSs on a single computer, a job usually done by setting up the different OSs on different partitions. USB and FireWire (IEEE 1394) Drives...
3. CD drives are called optical drives because microscopic pits
CD/DVD Drive Overview Compact Disc (CD) and Digital Versatile Disc (DVD, formerly Digital Video Disc) drives are called optical drives because microscopic pits embedded into the discs are read by measuring reflected laser light. Read-Only Memory (CD-ROM) drives became popular around 1994 and represented a major improvement over floppies for program installation. They can also be used to read from CD data discs. Eventually came CD-R drives, which allowed discs to be burned (recorded) once only. There weren't too many of these ...
4. Maintenance of Optical Disc Drives and Discs
The same cleaning kits you use to clean lenses in audio/video optical disc players can be used to clean lenses in computer drives. It is also helpful to spray the inside of the disc drawer with Blow Off or a similar air spray. Do not use any chemicals or solvents anywhere near a drive unless it is designed for it. Cleaning doesn't need to be done often unless the computer is exposed to dust, tobacco smoke, or other pollutants. Diagnosing Optical Disc Problems The list of problems that can occur with optical drives i...
5. Video is the single most important feature of a PC
Video, Sound, Modems, and Network Adapters Video Overview Video is the single most important feature of a PC. Even in the two situations that don't require video, servers and blind people's computers, video is still essential. In the case of servers that aren't regularly accessed by users, you still need video on occasion for configuration, repair, and other operations. Blind people use screen readers and keyboards to use their computers, but screen readers don't work until the OS boots. Consequently, repairs and other ope...
6. Video adapters are available in AGP and PCI
Video Adapter Interfaces Video adapters are available in AGP, PCI, and other older interfaces. Accelerated Graphics Port (AGP) AGP represents an advancement over previous video interfaces. It allows for more efficient transfer of data between the chipset and the graphics controller. There have been three different connectors used for AGP. These are designed so that only the correct card can be inserted into a given slot. Each connector represents a different standard that includes a different signal voltage and o...
7. Older network adapters came in myriad types
Selecting a Network Adapter Older network adapters came in myriad types, but today's cards are mostly Ethernet cards. Ethernet is a network standard that almost exclusively uses Cat 5/Cat 5e UTP (unshielded twisted pair) cables with RJ-45 connectors. RJ-45 connectors are very similar to standard RJ14 modular telephone plugs, but are twice as wide and have eight wires. Many of today's motherboards come with built-in Ethernet adapters. Ethernet transmission speeds have increased from 10 to 100 to 1000 Mbps. Older cards worked at a fi...
8. Mice can be connected to PCs in at least one of four ways
Mouse Interfaces Mice can be connected to PCs in at least one of four ways: serial (DB-9 female connector), PS/2 (the small, round, 5-pin connector), USB, and infrared or radio frequency wireless. Many mice come with adapters so that an individual mouse can be used in both PS/2 and serial ports, or both PS/2 and USB ports. More information about these follows: Serial: This is the original interface used in personal computers. Serial devices are hot-pluggable. Although new computers no longer come with serial mice, the vast...